Articulating RPi Camera Stepper Mount (REMIX,EDIT)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A remake of the original X-axis stepper mount to be compatible with any non-standard or original design.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 310
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I remade the original X-axis stepper mount so that it would be compatible with all configurations/variances/etc. of the X-axis on the Prusa MK3(S).
This design relies on the underside of the stepper motor for keeping the mount from swinging left or right, instead of using the geometry of the carriage to hold it in place. It also has a diagonal cutout for the screw so small variances in motor dimensions can be accounted for.
Hardware required: M3 countersunk screw (preferred) or hex cap bolt | Length: 6-10mm
The countersunk screw is preferred because it will “bite” in and keep the mount from sliding out of place.