Liczymy pasujące modele…
This is a revision of the camera arm that Boogie had provided to serve as a base for people's own designs. I extended the length of the camera arm and added a bend to create a viewing angle. It should be printed in PETG at 30% infill; if…
Edit 1 : I have added a new support (v2), fixed between bed and spring for more stability. Original : This is a remix from ArduCam Stand : https://www.thingiverse.com/thing:1579435 I have replaced existing foot with an Anet A8 bed mount.…
Rapsberry Pi picamera micro case. Designed to be mountable on flat surface or using self adhesive tape on smooth surface ie window. Best printed on ASA although my builds are on PLA for the test. The files: ✅ Front ✅ Gasket ✅ Rear ❌ No…
Parts ANCHOR (2X) (V-Slot anchor clips with dovetail opening) SCREW (Main screw with dovetail base) NUT (Ball joint connects to case socket and adjust height on screw CASE (Camera mount with socket attaching to ball joint on NUT CAP…
Camera mount for the Arducam B0176 for use with AnyCubic Kobra Neo PEI plate mounting. Slip the model over the lip used to peel the plate from the bed. Perfect angle to see print nozzle and watch prints in Octoprint.
I created this camera mount for the Flashforge Adventurer 5M. The camera I used is an Arducam, but this will work with most 38x38mm camera modules. Installing Camera to Mount: This is designed to use 4: M2 screws to attach the camera to…
Couldn't find any mounts for this combination, so made my own. Holds an arducam ov5647 and an HDMI-to-CSI adapter board on the back using standoffs. Uses M3x8 screws on the joints, mounts to extrusion using an M5 screw (allows for…
Resized the model to work for the Arducam 16MP w/ the Sony IMX519 sensor. You'll still need the original corner mount, from here .
VZBOT 235 AWD - CNC kit ArduCam Mount Camera tilt angle adapted to CNC kit We don't like looking into the fan and extruder, so we needed to see what the nozzle was doing on the table. Two models were produced that have an angle of 10 and…
enclosure 4 Arduicam multi camera Module V2.2 Bodem plate and 2 lid's , 1 for 1 / 2 cams and 1 for 3 / 4 cams
Camera housing for the Arducam Raspberry Pi IR cutoff camera I printed the front shell with 100% infill on the snaps just to be sure! It's probably not necessary though. The threads on the rear shell benefit from a bit of cleanup with an…
I created a CSI/HDMI adapter port for my Prusa enclosure and a Raspberry Pi camera Print instructions printed with PET and 0.15mm layer height
Remixed from https://www.thingiverse.com/thing:2843422 to enlarge the notches to fit an Arducam, which is a little bit thicker and wider than a Pi cam. Needs to be paired with cam_arm_v2.stl from the Pi cam thing linked above. Category:…
This is a mount for the Arducam OV9281 UVC USB, It includes a 37mm lens filter thread, so you can add a filter over the lens to keep it from being damaged in competition, or to filter out light glares. I found that the original lens of…
The camera mount was designed for the right side gantry on the Neptune 4 Pro. I modeled the mount in Solidworks and printed with Elegoo PLA+, Matte Black. Holes for mounting the ArduCam are sized for M2x4 threaded inserts. BOM: (2) - M2x6…
This model is a case for the Arducam OV9281 and OV2311 using this USB C adapter board https://www.etsy.com/listing/1842851233/arducam-ov9281ov9782-usb-c-converter-pcb Uses an m2 x 4mm heatset insert and 4 M2.5 x 10mm bolts.
It says rev E on the camera. not sure what that means. Anyway, added holes to work with this model. I flipped the spacer and sanded it down so it wouldn't pinch the wire going from the front to the back. not perfect but it works. might…
Hirth Plate (1.5 teeth glue) is to be glued to the ArduCam Base Plate and HoriTop (plate). Depending on mounting/joint orientation, can hirth plate can be on the inside or outside. The Smaller ArduCam Case is then mounted on top of the…
A mountig enclosure for the Arducam IMX219 (SKU:B0196). It has a clamping feature, that it can be used as a webcam. The middle part of the arm now has two wings to avoid tilting. (Bein(2).stl) To assemble it, you will need 1 M3x15mm Screw…
This model allows you to mount an Arducam OV5647 Raspberry Pi Camera to the X-Axis Motor Mount, providing a stable mount that moves with the Z-Axis vertically. Designed for Prusa MK3S/MK3S+. Compatibility with other printers is possible…
This is a revision of the camera arm that Boogie had provided to serve as a base for people's own designs. I extended the length of the camera arm and added a bend to create a viewing angle. It should be printed in PETG at 30% infill; if…
Camera Cover dimensions where updated to accommodate for the v3 RPI camera
Part of the OpenScan Benchy 3D Scanner comparison, see https://github.com/OpenScanEu/OpenScanBenchy/ We publish all the original files (send by the participants) as well as the aligned version shown in the final rendering. Feel free to…
3D Model of the Arducam Raspberry Pi Noir Camera Module v2.3 8MP IMX219 linked below. LINK: https://a.co/d/a3vHtyj
3D Model of the Arducam Day-Night Vision Camera (Fisheye) OV5647 5MP linked below. LINK: https://a.co/d/fcFQiCM
I made this camera mount for my Prusa Mini+ and 5MP Arducam (https://www.amazon.com/gp/product/B0867C9SZP) Thanks to @andimoto I used a similar way to mount to the nozzle fan. This camera plugs directly into a Raspberry Pi running OctoPi…
This is a simple clip-on mount to hold an Arducam on the Prusa CORE One light bar. I used an Arducam IMX519 with a 140°(D) Wide Angle M12 Lens and positioned it to monitor the nozzle while homing and heating. This particular camera has a…
This is an adapter for the Picamera 3 from Arudcam that allows you to attach it to a 28mm Microscope Eyepiece. It includes a slide-in spring to keep the camera in place. The adapter slides down 25mm onto the microscope eyepiece. NOTE:…
For my microscope, I wanted to add a camera. High-quality microscope cameras can get quite expensive, but I found a solution using the Raspberry Pi HQ Camera , which offers excellent performance at a fraction of the cost. To use the…
Edit 1 : I have added a new support (v2), fixed between bed and spring for more stability. Original : This is a remix from ArduCam Stand : https://www.thingiverse.com/thing:1579435 I have replaced existing foot with an Anet A8 bed mount.…
This is an enclosure for the Arducam 1080p Day/Night USB camera . I needed to make a baby monitor for someone and had a raspi zero 2 and arducam to get started . Here’s an enclosure that uses (4) 16mm M2 screws and heat inserts. My board…
A simple 3D-printed focus adjustment tool designed for the 16MP NoIR Camera Module (SKU B0386) on Raspberry Pi.
I designed this case for an Arducam. I specificall used the B0200 camera ("Arducam 1080P Low Light WDR USB Camera Module for Computer, 2MP 1/2.8” CMOS IMX291 100 Degree Wide Angle Mini UVC Webcam Board with Microphone") Amazon / Arducam…
This case is designed to facilitate the mounting and protection of the Arducam B0332 camera along with other Arducam cameras that share the same footprint. The case is specially designed for use in FTC and aligns to an 8mm grid pattern.…
The 477m PCB is quite a bit smaller than the older arducam boards. This 3D printable adapter allows you to use it in designs meant for the older 30mm spacing mounting pattern.
Mount fitting cheap Arducam: https://www.arducam.com/arducam-ov564 Changed also connection pins by +0.1 mm to tight fit.
Streamer friend of mine, Erby , needed a some cases for his cameras. Super easy print, use whatever material you want. Hadware needed: 4 M3 Threaded Inserts 4 M3.50 x 6 screws Made for this camera specifically: Arducam 1080P Day & Night…
Happy 10th anniversary to the Raspberry Pi! <Description> Ultra small Pi Zero Case with Arducam 16MP autofocus camera for Tripod. PiZero_case_8_1_Zero_Case_withPiCamera_Top is Top Case.…
This is a remix of rin_ofumi's great case for the Raspberry Pi Zero and camera module with the “Frank-S01-V1.0 OV5647” designation. It's sold online by Pimoroni and on Amazon by Arducam. I added slots on the top/rear to allow airflow for…
Please like and download this model, It helps me justify the time expense. Sneaks compatible case for Arducam 1080P Low Light Low Distortion USB Camera Module with an M12 lens. AKA the UC-B18 SKU B0468 (2MP IMX323) Amazon ASIN B0CGLW3Z1N…
The particular arducam I bought has a larger lense than fits on the original case. Should also fit alot more size lenses
Arducam B0251 Kameragehäuse mit Halterung Dieses Modell ist ein zweiteiliges Gehäuse mit passender Halterung für die Arducam B0251 Kamera.…
I liked the design and the effort that there are many parts for the cam holder. Also has the original creater step files included. I had a Arducam 16MP autofocus. It came in it's own case. Which I liked also very much. So I took the step…
Snap fit enclosure for this camera: https://www.arducam.com/arducam-1080p-day-night-vision-usb-camera-2mp-infrared-webcam-with-automatic-ir-cut-switching-and-ir-leds.html Print Settings 0.2mm PETG, 15% infill (default quality profile in…
It seems there are many many board sizes for Raspbery Pi cameras. Here is a case and cover for the Arducam B0031 with M12 lens to fit Sneaks' Articulating mount. I included screw holes in the mount, but the fit is tight enough with the…
Made this CSI camera case for a robotics projects and found it fits the version 2 and 3 Raspberry Pi cameras as well as the Arducam 8mp. Can't confirm it fits other variants other than base models.
Rapsberry Pi picamera micro case. Designed to be mountable on flat surface or using self adhesive tape on smooth surface ie window. Best printed on ASA although my builds are on PLA for the test. The files: ✅ Front ✅ Gasket ✅ Rear ❌ No…
Needed a housing for my InnoMaker day and night vision camera so I added opening in the housing to accomadate the light sensor and cable connection.
Modified the original Camera Module 3 Enclosure to fit an Arducam Camera Module 3 with an M12 120° angle lens. This should work with other Arducam ML12 lens models as well. Included the original back plate and mounting bracket for ease of…
Parts ANCHOR (2X) (V-Slot anchor clips with dovetail opening) SCREW (Main screw with dovetail base) NUT (Ball joint connects to case socket and adjust height on screw CASE (Camera mount with socket attaching to ball joint on NUT CAP…
Arducam case made from a Cl4p-TP model with slot in back lid for cable to go through. A few rough spots left to figure out but works great. Will need some hot glue to help hold camera module in place for now (working on a different…
New Front Cover to have the camera in a different orientation. New hole pattern to mount to 1" punch tubing for FRC
Amended faceplate to fit https://www.amazon.ca/dp/B098L7WJ4C?th=1 USB splitter ports
Arducam for Raspberry Pi Camera Module 3 Case, ABS Housing for IMX519 16MP Autofocus Camera, Compatible with Raspberry P
I wanted to monitor my prints day or night and found the night mode on this camera was worked great for my purposes. I wanted to mount it in the printer enclosure and have the ability to move and reposition it. the camera runs a bit warm…
This is remix of front panel for Arducam 16MPx with Autofocus. Original have circle cutout, Arducam need square cutout. Print instruction: Printer brand: Prusa Printer: Mini+ Rafts: Doesn't Matter Supports: No Resolution: 0.15 - 0.2…
I cobbled this together in TinkerCAD because it is a PAIN in the butt to find a camera mount for this specific board (the 36x36 board with the screws on each corner...) so! I made this! I jacked the mount point from one of the camera…
This is a modified back plate for the Arducam / OV5647 Raspberry pi cam. The back plate has a insert of 5mm (0.196") that fits a M12x0.5 screw. Horizontal insert! USE THE FRONT PLATE FROM THE ORIGINAL DESIGN! I changed nothing of the…
This case will properly hold an Aruducam model b0506 camera. It will use the single-axis connector on the back to connect to other items in the parent print, or with standard camera accessories for sports cams. It works well with 20mm M2…
Compatible with https://www.printables.com/model/309992-raspberry-pi-camera-mount-for-2020-or-2040-extrusi
This is a converted allowing the RunCam Switch FPV system to use the interchangeable lenses that are sold for the ArduCam. Category: 3D Printing
This is a case for a Rasberry 3B+ and is a remix of "Raspberry Pi 3 B+ Ultimate Cooling Case" by Pablofette" This case is designed to hold an HDMI adapter, a fan and a on-off switch for the Pi. This Pi case is made to fit with an Arducam…
This is an enclosure for the Arducam 1080P Day & Night Vision USB Camera Module (SKU: B0205) which is a nice camera USB with auto-switching infrared night vision. The back of the enclosure has a mount that works with the Modular Mounting…
This is a remix of the excellent design from WHerzog to allow the usage of the Arducam Day-Night Vision for Raspberry Pi Camera, Wide Angle Automatic IR-Cut Switching All-Day Image, IR LED for Low Light and Night Vision, OV5647 5MP 1080P…
Quick mod to fit in the Arducam 16MP Autofocus camera board based on the Sony IMX519 sensor. Due to slightly lower supports I had to use tiny screws, but that's easy to fix.
A simple case for the Arducam UC-733 board. The Fusion 360 source file is included to make remixes easier. Hardware Required This was designed around some basic hardware from McMaster Carr but their mesaurements are pretty standard and…
Remix of the Arducam cap/case for the pi camera mount to account for a square PCB
Cheaper r pi camera (https://www.amazon.ca/gp/product/B013JTY8WY/ref=ppx_yo_dt_b_asin_image_o00_s01?ie=UTF8&psc=1) but it's not the same size as the standard camera so it won't fit the other mounts. This bracket works with M3 screws and i…
ArduCam IMX519 https://www.arducam.com/product/imx519-autofocus-camera-module-for-raspberry-pi-arducam-b0371/
I really like pellcorp's "Simple PiCam v1.3 mount" , but it was too tight to fit an Arducam 5MP Pi Camera. I broke my camera's LED trying to fit it in, so I thought I'll make one myself. While this was designed from scratch, I've taken…
Arducam CSI-to-HDMI Adapter mount. I used VHB tape to stick in the electronics bay of my Voron V0 Used hardware: 4x M2x5mm self tapping screws
Use with this mount: https://www.thingiverse.com/thing:2956323 Designed specifically for the Arducam, you can buy it here: https://www.amazon.com/gp/product/B012V1HEP4/ Cable (you'll need to buy a longer one than is provided with the…
This is a mount for the larger Arducam with the M12x0.5 lens attached. I've designed it to attach to the Flexible camera mount for Ender 3 Pro: https://www.printables.com/model/199574-flexible-camera-mount-for-ender-3-pro The mount comes…
Just as in johanncc's original, this model requires no supports. It's a minor modification, just making room for the extra module underneath the lens.
https://www.thingiverse.com/thing:5181195 Print Settings Printer: Ender 3 v2 Rafts: No Supports: Yes Resolution: .1 Infill: 36 Filament: Polymaker Polylite ASA Black Notes: I cobbled this together to make this work with this make; This…
I really liked this camera mount, but I prefer a different cam. Arducam Noir is a 5mp cam with no IR filter, so it does really well in low light at the sacrifice of color fidelity. At any rate, this prints really easy and snaps right on…
Arducam 16/64MP Camera Mount for IKEA PLATSA 2x Screws 4,5 x 16
Changed the size of the lens hole to fit for the Arducam 64MP(https://www.amazon.com/Arducam-High-Resolution-Autofocus-) (WIP- Will upload pictures soon as this is going in my Voron 2.4r2 350^3)
I purchased an Arducam CSI to HDMI Cable Extension Module online and needed a way to mount it to my pi camera case. Designed this small piece that glued to the back of the camera case and then provided a place to screw the module to. Not…
I bought this Arducam 5MP Wide Angle USB UB0233 camera on Amazon, to try out with OctoPrint. I had it wired up with twist ties. I couldn't find a mount specific for it, so I figured I'd make one. There's a Logitech C270 style connector…
Case for Arducam OV9281 and similar cameras. It requires 4 4-40x5/8" screws to secure the camera inside the case.
If your Pi cam wasn't cutting it and you switched it out for a modular Arducam but couldn't find the right case, heres a new look on a solution you may have seen for the pi. Adjusted for an Arducam, this case and mount fits the base…
This is a minimalistic enclosure and mounting solution that I designed to mount my Arducam B0268 for my Voron 2.4, although it could very likely fit a variety of other printer frames. This camera is perfect for large printers like the…
Codemonkey1973's Ender 3 Camera Mount for Raspberry Pi Camera V2.1 was very well designed but I wanted to cleanly route the cable to the back and saw room for improvement. So I rebuilt it with the following improvements: Threaded holes…
Idea is to use double sided type to fix pcb to Raspi case (in my case it is armor case). To not bother with tinny screw holes on pcb and finding screws for that, I used 1.75mm filament.
This is a remix-of-the-remix of thing:4601248 by smarc....who remixed this cam mount from lab27 thing:3121052 "Prusa I3 MK3 Raspberry Pi Camera Mount" I actually used this with the remix of that mount by inomad360 thing:4514535 so the…
This is a quick remix of Seabird HH's wonderful Raspberry Camera Bracket but adapted for a 2020 extrusion. The mount is secured with a M3 bolt and T-nut on either side of the extrusion. I didn't run the ribbon cable in the example image…
I modified Jacob Thompsons Arducam case to make it the same height as a gopro mount. Then I added the gopro compatible legs for the bolt and mirrored it. this fits perfectly with the Arducam 8k that i got from Amazon…
This model is inspired by Michal Fanta and arm is based on Original Prusa I3 z-axis-top model. It is possible to use with Raspberry Pi Camera and with Arducam and other USB cameras where is possible disconnect and connect the USB cable to…
Shroud / casing / stand for the Rev.C OV5647 Camera for Raspberry Pi. Same sensor as in the original (v 1.3) Raspberry Pi camera, but with a proper lens. More about this camera can be found here:…
A Remixed Cover Lens for a Raspberry P1 Camera V2 board with an ArduCam 8MP IMX219 Sensor module (for RPi and Jetson Nano) with a 175deg Wide Angle M12 Lens. I included the Step file for your remix convenience.
Enclosure for the B0205 2MP Automatic IR-Cut Switching All-Day Image USB2.0 Webcam with IR LEDs Made to hang from the frame of my Type A Machines Series 1 3D Printer. Some support required for the front plate. Four tiny screws are…
This is 4AM Engineering's bracket for Arducam raspberry pi camera modules modified to fit Bogdanko's excellent Prusa camera mount. I designed it to fit my Arducam B0152 (8MP noIR fisheye) module, which is fitted to my printer's Y axis.…
Here is a link to the CAD: https://cad.onshape.com/documents/c6dbc3d6433bca696258d866/w/54d51c44b96ec7cce082f748/e/0325a5e5995a94b8c2d8da66?renderMode=0&uiState=63e95df58178855d47cc2581 Whole robot CAD:…
For the stand use Organic support in PrusaSlicer 2.6. I've printed in PETG, Layer height of 0.2 mm, 15% infill on a Prusa MK3S+. Textured build plate. Needed hardware: (2) M3 nut (2) M3 square nut (insert square nuts before closing the…
you probably want the newer update to this: https://www.printables.com/model/497457-arducam-day-night-b0205-case-and-swivel-mount-with which addresses a few issues! Should be pretty straight-forward to print & connect. The back plate will…
