1 / 9
Arducam Camera Housing and Mount for Original Prusa Enclosure — zdjęcie 1
1 / 9

Arducam Camera Housing and Mount for Original Prusa Enclosure

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Arducam 8MP USB camera module housing and mount compatible with HeyVye's Modular Mounting system.

Ocena
0 / 5
Polubienia
8
Pobrania
59
Wydruki
0
Wyświetlenia
390
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Share Alike

Arducam 8MP USB camera module housing and mount compatible with HeyVye's Modular Mounting system. I have included a stub arm for use with the Original Prusa Enclosure, or any other enclosure that can use a M3 through bolt. The Arm Axis Changer is needed from the Modular Mounting system to angle the camera in 2 directions.

The Arducam used was purchased on amazon here: https://www.amazon.com/dp/B0C3L8S68N?ref=ppx_yo2ov_dt_b_product_details&th=1

It uses a 115° wide angle M12 lens, that must be removed temporarily to fit in the housing. The exterior border of the PCB must be trimmed/removed permanently. The back panel connects to the front with (4) M2.5x8 or M2.5x10 bolts.  The back panel and PCB can be oriented sideways in the front housing if a vertical aspect ratio is desired.  I use a 3:4 aspect ratio at 1200x1600 vertically to capture the entire build volume.  Modifications to octoprint settings were required to increase the resolution.

Print Settings

Printer Brand:

Prusa

Printer: 

I3 MK3S

Supports:

Yes

Resolution: 

.1mm

Infill:

15

Filament: Overture PETG Black

 

 

Category: Camera

Tagi