Arducam Camera Housing and Mount for Original Prusa Enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Arducam 8MP USB camera module housing and mount compatible with HeyVye's Modular Mounting system.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 59
- Makes
- 0
- Views
- 390
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Share Alike
Arducam 8MP USB camera module housing and mount compatible with HeyVye's Modular Mounting system. I have included a stub arm for use with the Original Prusa Enclosure, or any other enclosure that can use a M3 through bolt. The Arm Axis Changer is needed from the Modular Mounting system to angle the camera in 2 directions.
The Arducam used was purchased on amazon here: https://www.amazon.com/dp/B0C3L8S68N?ref=ppx_yo2ov_dt_b_product_details&th=1
It uses a 115° wide angle M12 lens, that must be removed temporarily to fit in the housing. The exterior border of the PCB must be trimmed/removed permanently. The back panel connects to the front with (4) M2.5x8 or M2.5x10 bolts. The back panel and PCB can be oriented sideways in the front housing if a vertical aspect ratio is desired. I use a 3:4 aspect ratio at 1200x1600 vertically to capture the entire build volume. Modifications to octoprint settings were required to increase the resolution.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Supports:
Yes
Resolution:
.1mm
Infill:
15
Filament: Overture PETG Black
Category: Camera