Flashforge Adventurer 5M - Arducam Camera Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Camera Mount for the Flashforge Adventurer 5m. Fit's most 38x38mm camera modules.
- Ocena
- 0 / 5
- Polubienia
- 44
- Pobrania
- 168
- Wydruki
- 1
- Wyświetlenia
- 3507
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
I created this camera mount for the Flashforge Adventurer 5M. The camera I used is an Arducam, but this will work with most 38x38mm camera modules.
Installing Camera to Mount:
This is designed to use 4: M2 screws to attach the camera to the mount.
Installing Mount to Frame:
If you printed the enclosure, you can fix the mount to the frame with 1: 3M screw. I also remixed the A1 guard plate to include an extra hole so you can use 2: 3M screws to mount it.
Tips:
No supports needed.
You will want to used a camera with a lower profile lens. The camera with a lens over ½" long will get hit by the extruder.