QIDI X-Plus 3 Magnetic camera mount for Arducam OV5648 5MP usb camera
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Camera mount for QIDI X-Plus 3 to use inside the case
- Ocena
- 4 / 5
- Polubienia
- 9
- Pobrania
- 82
- Wydruki
- 1
- Wyświetlenia
- 1298
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Mount for a camera for the QIDI X-Plus 3.
The camera is an Arducam 5MP USB camera from Amazon.
Arducam 5MP Wide Angle USB Camera for Computer, 1/4" CMOS OV5648 Mini UVC USB2.0 Video Webcam
https://amzn.eu/d/7XNr6zw
Uses 2 high-quality magnets to attach to frame (10mm x 5mm round magnets)
You will also need 4 M2.5x 6mm screws to attach the camera to the mount.
The Arducam is a small camera that fits nicely inside the build chamber and the mount doesn't require any modifcation to the printer itself.
I used a touch of superglue to fit the three prints together.
I printed with 0.4mm nozzle with 0.2mm layer height and no supports in PLA+ but PETG or ASA may be better.