QIDI X-Plus 3 Magnetic camera mount for Arducam OV5648 5MP usb camera
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Camera mount for QIDI X-Plus 3 to use inside the case
- Rating
- 4 / 5
- Likes
- 9
- Downloads
- 82
- Makes
- 1
- Views
- 1,298
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Mount for a camera for the QIDI X-Plus 3.
The camera is an Arducam 5MP USB camera from Amazon.
Arducam 5MP Wide Angle USB Camera for Computer, 1/4" CMOS OV5648 Mini UVC USB2.0 Video Webcam
https://amzn.eu/d/7XNr6zw
Uses 2 high-quality magnets to attach to frame (10mm x 5mm round magnets)
You will also need 4 M2.5x 6mm screws to attach the camera to the mount.
The Arducam is a small camera that fits nicely inside the build chamber and the mount doesn't require any modifcation to the printer itself.
I used a touch of superglue to fit the three prints together.
I printed with 0.4mm nozzle with 0.2mm layer height and no supports in PLA+ but PETG or ASA may be better.
