Arducam Raspberry camera enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
This is 4AM Engineering's bracket for Arducam raspberry pi camera modules modified to fit Bogdanko's excellent Prusa camera mount. I designed it to fit my Arducam B0152 (8MP noIR fisheye) module, which is fitted to my printer's Y axis.
Print Settings
Printer Brand:
Prusa
Printer:
Rafts:
No
Supports:
No
Resolution:
0.20mm or lower
Infill:
20%
Filament: Amazonbasics PETG black
Notes:
Use at least 2 perimeters when printing, for strength.
The backside is really just there for aesthetics. You can get away without it but I didn't like screws touching the camera's PCB.
Avoid using translucent filament, as the camera LED will bleed through it.
Post-Printing
Screws
Use M3 screws and nuts to fasten the backside or just the camera to the front.
How I Designed This
Autodesk TinkerCAD
I just elevated the original Arducam bracket a little so its height would correspond with the arms for Bogdanko's camera enclosure, then added the arms for the latter.
Category: 3D Printer Accessories