Arducam Raspberry camera enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is 4AM Engineering's bracket for Arducam raspberry pi camera modules modified to fit Bogdanko's excellent Prusa…
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 98
- Makes
- 0
- Views
- 1,109
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
This is 4AM Engineering's bracket for Arducam raspberry pi camera modules modified to fit Bogdanko's excellent Prusa camera mount. I designed it to fit my Arducam B0152 (8MP noIR fisheye) module, which is fitted to my printer's Y axis.
Print Settings
Printer Brand:
Prusa
Printer:
Rafts:
No
Supports:
No
Resolution:
0.20mm or lower
Infill:
20%
Filament: Amazonbasics PETG black
Notes:
Use at least 2 perimeters when printing, for strength.
The backside is really just there for aesthetics. You can get away without it but I didn't like screws touching the camera's PCB.
Avoid using translucent filament, as the camera LED will bleed through it.
Post-Printing
Screws
Use M3 screws and nuts to fasten the backside or just the camera to the front.
How I Designed This
Autodesk TinkerCAD
I just elevated the original Arducam bracket a little so its height would correspond with the arms for Bogdanko's camera enclosure, then added the arms for the latter.
Category: 3D Printer Accessories