1 / 2
Arducam OV9281 Camera Mount - 37mm Lens Filter Attatchment — zdjęcie 1
1 / 2

Arducam OV9281 Camera Mount - 37mm Lens Filter Attatchment

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Lens Filter/Protector Mount for Arducam OV9281

Ocena
0 / 5
Polubienia
5
Pobrania
70
Wydruki
0
Wyświetlenia
543
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a mount for the Arducam OV9281 UVC USB, It includes a 37mm lens filter thread, so you can add a filter over the lens to keep it from being damaged in competition, or to filter out light glares. 

I found that the original lens of the Arducam breaks off very easily, so this adapter prevents that by forming a barrier around the camera. This mount should also provide sufficient protection without a filter, since the filter mount protrudes over the lens itself. The screws to secure the base to the top are M3x6mm self tapping. The mount uses common ½" MAXTube spacing, with a through hole width suitable for #10 screws.

I haven't tested if this lens mount interferes with the FOV of the camera, but given how close the lenses are to each other, I highly doubt it.

Tagi