1 / 3
Arducam Tube Mount — zdjęcie 1
1 / 3

Arducam Tube Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Shim to mount an Arducam camera onto punched tubing. Built for FRC.

Ocena
0 / 5
Polubienia
2
Pobrania
46
Wydruki
0
Wyświetlenia
314
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Public Domain

This is a rather simple part designed to allow you to mount an Arducam global-shutter camera such as this one on a piece of 1x1" punched tubing.  It's designed for this case designed by FRC team 3295. The design is fully parametric, so it should be easy to modify for other use-cases.

There are two versions: the Fixed version has the camera aimed 45 degrees above the horizontal, while the Adjustable has additional holes to aim the camera lower.

Designed by Alex Sirota in 2024 for FRC team 6238, the Popcorn Penguins. Available for use and remixing by all.

Tagi