1 / 3
Camera mounts for RaspiCam V3 and Arducam 16MP for Original Prusa Enclosure — zdjęcie 1
1 / 3

Camera mounts for RaspiCam V3 and Arducam 16MP for Original Prusa Enclosure

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remix to fit RaspiCam V3 and Arducam 16MP camera modules, also lifted the camera position by 40 mm

Ocena
5 / 5
Polubienia
10
Pobrania
83
Wydruki
2
Wyświetlenia
799
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I used the step file from the original model to adapt it to fit the PiCamera V3 module as well as the Arducam 16MP module. I also lifted the camera position by 40 mm, because I did not want the frame extrusions under the print bed in the frame. One photo shows the viewing angle with an MK3S+ and ArduCam 16MP, the other one an MK4 with RaspiCam V3 module. The list of necessary hardware is the same as for the original model.

I also should mention that I use the Squash Ball Mod on my printers, which raises the printer by about 20 mm, so the effective increase of the camera POV is about 20 mm compared to the original.
Update 2024/3/8: Added Fusion 360 and STEP files.

Tagi