1 / 2
Roku Remote Holder — zdjęcie 1
1 / 2

Roku Remote Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Holder for Roku's remote. Sometimes simplicity is best.

Ocena
5 / 5
Polubienia
10
Pobrania
55
Wydruki
1
Wyświetlenia
2473
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution

This is the first design that I upload.

I know most remotes out there don't have a piece of fabric or a lanyard to hang on, but you can easily add it to them. This very simple design can work for these remotes that can be hung.

The piece screws onto the TV in a existed screw hole. The concept of this design can be used to hang the controls on the side of the TV, in case there is no space underneath.

Designed in Solidworks in 5 minutes and printed on my Prusa MK3S in 4 minutes with Prusament PLA and a 0.8mm nozzle.

0.3mm layer height, 2 perimeters, 100% infill, no supports.

 

Tagi