Adjustable Mold System
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Create your own Mold
- Ocena
- 4,429 / 5
- Polubienia
- 229
- Pobrania
- 890
- Wydruki
- 8
- Wyświetlenia
- 2964
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
here we have a system to build a mold in any size you need
useful if you want to cast something out of resin, create a mold out of silicone, or play with kinect sand or whatever you can think of
the elements have small guides to ensure a tight fit, the tolerance is 0.1mm
It is best to fix the elements with foldback clamps, you can get them quite cheaply, for example. here on Amazon https://lmy.de/y8lEH
the elements have a height of 53mm. if you need a higher version, feel free to contact me
You need at least 4 mold corners from which you can make a small mold. I have also created a base plate for this
Depending on how big the mold should be, you need the right amount of straight lines