1 / 4
Rear wiper cover for Alfa Romeo Mito and Peugeot — zdjęcie 1
1 / 4

Rear wiper cover for Alfa Romeo Mito and Peugeot

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Rear wiper cover replacement for Alfa Romeo Mito and Peugeot. This Model might also fit for other car brands.

Ocena
5 / 5
Polubienia
7
Pobrania
147
Wydruki
3
Wyświetlenia
890
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I lost the rear wiper cover for my Alfa Romeo Mito and needed a replacement. It looks like a common design for various car brands and might also fit for others (not tested). I am happy for feedback and like to hear if this fits (or not) for other brands as well.

Compatibility

  • Alfa Romeo Mito
  • Peugeot

Print settings

  • Layer Height: 0.2mm
    • Use variable layer height for smoother top surface.
  • Perimeters: 3
  • Infill:
    • Density: 100%
    • Pattern: Rectilinear
  • Brim (optional): 5mm
  • Supports: Everywhere
  • Suggested material: PETG, ASA

Depending on your surface stickiness you might need to add a brim (I like to use 5mm).

The bottom of the model is slightly tilted, therefore you need to lay it flat.

For a cleaner looking top surface, use the variable layer height. I used 0.15mm for the top layers (green) and 0.2mm as default layer height (gray).

Print time (estimated)

Prusa Slicer 2.5.0

  • 0.6mm Nozzle: 1 hour
  • 0.4mm Nozzle: 1 hour 30 minutes 

Tagi