Workstation for Arduino Uno
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Large workstation to mount an Arduino Uno, (2) breadboards.
- Ocena
- 0 / 5
- Polubienia
- 43
- Pobrania
- 215
- Wydruki
- 0
- Wyświetlenia
- 1477
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
I created this model to make working with an Arduino & breadboards a bit easier and more organized. The Arduino should fit exactly, as well as an 830pt & 400pt Breadboards. The underside is modelled with domed shafts to save some filament and keep the entire model free of the need for supports.
I printed this piece in PETG and did see a nominal amount of shrinkage so I'd recommend printing at 101-102% of scale. I had printed just the Arduino mount section in PLA and the fit was a perfect snap in place. The feet I printed in TPU, the feet holes are modelled at 3mm, the feet stems are 3.5mm for a snug fit, but you may need to drill out the holes a bit.
I've added the cable management holes to the right side after I printed it, and will likely make new adjustments like a drawer in the future.