Aviation Weather Map LED Light Pipe
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This print is for holding addressable LED's used in this project: https://slingtsi.rueker.com/making-a-led-powered-…
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 126
- Wydruki
- 0
- Wyświetlenia
- 1850
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial
This print is for holding addressable LED's used in this project: https://slingtsi.rueker.com/making-a-led-powered-metar-map-for-your-wall/
Using clear filament, for penetrating the foam board and using this model to hold the LED, the color of the LED will show through the foam board as a little light, rather than a big LED. The 3D printed LED holder is hot glued to the back of the foam board after centering on the filament.
Print instructions
I used clear filament to print, but not required. No supports are required. I printed 50 at the same time.