Aviation Weather Map LED Light Pipe
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This print is for holding addressable LED's used in this project: https://slingtsi.rueker.com/making-a-led-powered-…
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 126
- Makes
- 0
- Views
- 1,850
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial
This print is for holding addressable LED's used in this project: https://slingtsi.rueker.com/making-a-led-powered-metar-map-for-your-wall/
Using clear filament, for penetrating the foam board and using this model to hold the LED, the color of the LED will show through the foam board as a little light, rather than a big LED. The 3D printed LED holder is hot glued to the back of the foam board after centering on the filament.
Print instructions
I used clear filament to print, but not required. No supports are required. I printed 50 at the same time.