Vertical clip for Gravity autorewind spool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Update 16/05/2020 The T04 version solve the difficulty found to load the filament through the first vertical curve.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 102
- Wydruki
- 0
- Wyświetlenia
- 1725
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Update 29/03/2021
The step file is now uploaded in order to facilitate the remix
Update 16/05/2020
The T04 version solves the difficulty found to load the filament through the first vertical curve.
I needed to reduce the space needed by the gravity's clip in the front part, so I have remixed the clip so the PTFE tube can come from up to down. The space needed has been considerably reduced.
The diameter of the hole for the PTFE is 4.5mm. I have tested it with differents diameters but the best approach for me was 4.5mm.
Also, I have tested with PTFE of different sizes successfully --> 4OD-2ID, 4OD-3ID and 4OD-1.9ID
Print instructions
Print it with the numbered side as the bottom face and with a 0.4 nozzle.