1 / 8
Ruger 22/45 MKIV Stock and Extended Magazine Base Plates — zdjęcie 1
1 / 8

Ruger 22/45 MKIV Stock and Extended Magazine Base Plates

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I duplicated the stock mag base plate for the Ruger 22/45 MKIV, and then modified it to make it thicker.

Ocena
5 / 5
Polubienia
55
Pobrania
458
Wydruki
6
Wyświetlenia
2464
Oceny
6

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

I designed this because I liked the look / style of the extended mag base plates for my Ruger 22/45 MKII and MKIII, but I did not like the look of the extended mag base plates for the MKIV, so I first duplicated the stock base plate, then padded it out from +0.10" to +0.25" in 0.05" increments.  Now you can print stock or extended mag base plates in whatever color you want.

If you have a 22/45 MKII or MKIII, here are the models for those mag base plates.

I highly recommend you print them in a vertical orientation so that the T-channel that the mag lips grab on to are printed as perimeters, and not layers.  See the pic for what I am talking about if you are unsure.  And use supports.  And you should use a raft as well, especially if you are printing it rounded end down.  I am using Atomic PLA - which is what the ones in the pics are printed in - and I love the colors, but I haven't found the right print temps to keep it from shrinking and deforming rounded shapes.

Tagi