Ruger 22/45 MKII / MKIII Stock and Extended Magazine Base Plates
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Duplicated the Ruger 22/45 MKII / MKIII magazine base plate, then padded them out +0.10" to 0.30" in 0.05" increments.
- Ocena
- 5 / 5
- Polubienia
- 24
- Pobrania
- 279
- Wydruki
- 2
- Wyświetlenia
- 2036
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
I already had extended mag base plates for my Ruger 22/45 MKII and MKIII, but since I duplicated the mag base plates for the 22/45 MKIV, I figured I might as well do it for the MKII and MKIII as well.
I highly recommend you print them in a vertical orientation so that the T-channel that the mag lips grab on to are printed as perimeters, and not layers. See the pic for what I am talking about if you are unsure. And use supports. And you should use a raft as well, especially if you are printing it rounded end down. I am using Atomic PLA - which is what the ones in the pics are printed in - and I love the colors, but I haven't found the right print temps to keep it from shrinking and deforming rounded shapes.