GoPro Hero 8 Form Fitted Rugged Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The rugged box, itself, is a remix of - https://www.thingiverse.com/thing:4757317 I printed the yellow "inserts" with…
- Ocena
- 5 / 5
- Polubienia
- 47
- Pobrania
- 430
- Wydruki
- 1
- Wyświetlenia
- 2910
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The rugged box, itself, is a remix of - https://www.thingiverse.com/thing:4757317
I printed the yellow "inserts" with TPU to keep it from marring the GoPro.
The top of the box was printed at 100% infill with PETG.
The bottom of the box was printed with PLA at 50% infill.
The TPU was printed at 5% infill (the brand I use is fairly stiff).
Check the video to learn how to make your own form fitted cases!
Thanks for checking it out!
*9/19/2022
I used Priline TPU from Amazon, and if you go here (https://www.chepclub.com/cura-profiles.html)
and download Chep's Cura Profiles zip folder, I used the TPU one. And the only thing I changed was the temp settings to:
Nozzle: 205c
Bed: 60c
He has non-Creality profiles as well, if you're not using a Creality printer, but I have not personally used them. So, results may vary.
Print Settings
Printer:
Creality CR-6 se
Rafts:
No
Supports:
No
Filament:
Matterhacker PLA, Prinline TPU, Overture PETG PLA, PETG, TPUBlack, Yellow
Notes: