Easy Acces Screw Driver Bit Holder [Adhesive Wall Mount]
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
1/4 hex shaft bit holder that provides easy access to bits and can be glued to any flat surface.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 89
- Wydruki
- 0
- Wyświetlenia
- 447
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
A holder for your screw driver bits. A problem with other bit holders are that the bits are often spaced to close together and too close to the back wall, which can make it difficult to grab a particular bit quickly.
This design spaces the bits apart from each other, which gives you enough space to easily grab the bit you want without poking your fingers on the adjacent bits. The bits are also offset away from the back wall so that you can slip a finger behind the bit to grab it easily.
This holder is intended to be glued onto a flat vertical surface. Recommended adhesives include: epoxy, construction adhesive, wood glue, or white glue. For best results, be sure to lightly roughen and clean the surfaces you intend to glue.
Recommended Settings:
Layer Height: 0.2mm