Lack enclosure double clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I saw something similar on thingiverse from asalas77, but needed it to be double ended because I have two lack tables…
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 1244
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
I saw something similar on thingiverse from asalas77, but needed it to be double ended because I have two lack tables to latch. I didn't remix this directly, I modeled this from the ground up, but the concept was definitely based on asalas77's version and he/she deserves full credit.
My original version is pictured above. This was functional but the shaft was a little short. I have since adjusted the model to allow and extra 3.5mm on each shaft. I have also made the shafts 0.2mm thinner so they slide easier. These modifications worked out very well.
I really love the idea of using a rubber band /elastic to spring the latch closed and keep it in the locked position.
I'm not sure how the licensing works, but if you remix this, please mention asalas77.
https://www.thingiverse.com/thing:3430790
Print instructions
Not a challenging print. I printed in PETG
0.2mm layer height
20% infill
Brim and skirt unnecessary