1 / 4
Box for jigsaw blades — zdjęcie 1
1 / 4

Box for jigsaw blades

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Carry box for jigsaw blades.

Ocena
5 / 5
Polubienia
15
Pobrania
144
Wydruki
1
Wyświetlenia
965
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

No supports needed.
The hinge holes need to be cleaned with a small diameter bit manually after print.
On the bottom part I poured some plastic glue on the hinge after printing for more durability.
As hinge pin I used 1.5mm2 copper wire (may vary based on the drill bit you use for cleaning the hole).
Foam inserts are put in to reduce the rattling sound. As the place for foam is left out on the top without it the blades might mix if shaken.

Tagi