1 / 4
Box for jigsaw blades
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Carry box for jigsaw blades.
- Rating
- 5 / 5
- Likes
- 15
- Downloads
- 145
- Makes
- 1
- Views
- 970
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
No supports needed.
The hinge holes need to be cleaned with a small diameter bit manually after print.
On the bottom part I poured some plastic glue on the hinge after printing for more durability.
As hinge pin I used 1.5mm2 copper wire (may vary based on the drill bit you use for cleaning the hole).
Foam inserts are put in to reduce the rattling sound. As the place for foam is left out on the top without it the blades might mix if shaken.