FLYNN'S Arcade Faux Neon EL Wire Sign from TRON
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
16" wide replica of the neon sign from the TRON movie using 2.6mm ElectroLuminescent Wire to simulate neon Printed in…
- Ocena
- 5 / 5
- Polubienia
- 71
- Pobrania
- 136
- Wydruki
- 1
- Wyświetlenia
- 2678
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
16" wide replica of the neon sign from the TRON movie using 2.6mm ElectroLuminescent Wire to simulate neon
Printed in Black PETG
This print is two main halves, the left and right side, which make up the sign. Plus a back bracket and 4 back 'nubs' that all trap nuts to secure the neon sign to some backboard.
EL Wire - for 2 color sign follow this, for 1 color, add the lengths together
- ~12 ft red EL wire
EL Wire Inverter to power up to 30 feet
- 5V to 12V Step up USB Cable
- USB Power adapter
The two halves interlock with a dovetail feature. This also traps nuts and is tightened by bolts. In total the hardware list
- 2x - M3x40 bolts to hold the dovetail joint
- 8x - M3x12 bolts to hold the sign to a backboard up to 1/4"
- 10x - M3 Nuts and (optionally) washers to go with the bolts
Print instructions
Print each large half as a separate print (sorry, tried to make it as one but didn't quite work out).
Also print the back bracket and 4 of the nubs. Assemble using the hardware. Run the EL wire in a continuous loop through the board, making out the letters. Put a dab of superglue to hold as needed. Follow guides to wire the power adapters and plug in the sign to have a replica faux neon FLYNN'S Arcade sign.