12 Shields (US, three hole) in 13:48 with 0.6mm Nozzle (No chin support)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I created a profile for printing 12 shields at a time with a 0.6mm nozzle on the printer.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 542
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Public Domain
I created a profile for printing 12 shields at a time with a 0.6mm nozzle on the printer. I am currently using Amazon Basics PETG and the photos show the results. I am very happy with the results as they took some tuning.
I have been printing the chin brace separately.
Print instructions
The settings are all in the 3mf and are specific to Prusa I3 MK3S.
I have noticed with some other filaments such as MGChemicals, you may have to increase the temp by 5 or 10 degrees. It's a balance between stringing and "corner cuts" where the radius is circumvented. Depending on the filament, adjust the filament print temp by 10 degrees C or so.