12 Shields (US, three hole) in 13:48 with 0.6mm Nozzle (No chin support)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I created a profile for printing 12 shields at a time with a 0.6mm nozzle on the printer.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 38
- Makes
- 0
- Views
- 542
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Medical Tools
- License
- Creative Commons — Public Domain
I created a profile for printing 12 shields at a time with a 0.6mm nozzle on the printer. I am currently using Amazon Basics PETG and the photos show the results. I am very happy with the results as they took some tuning.
I have been printing the chin brace separately.
Print instructions
The settings are all in the 3mf and are specific to Prusa I3 MK3S.
I have noticed with some other filaments such as MGChemicals, you may have to increase the temp by 5 or 10 degrees. It's a balance between stringing and "corner cuts" where the radius is circumvented. Depending on the filament, adjust the filament print temp by 10 degrees C or so.