1 / 4
Lerdge iX Parts w/ Heatserts
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stock parts modified with heatserts.
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 152
- Wydruki
- 1
- Wyświetlenia
- 1290
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (7)Wydruki i komentarze (Wydruki: 1) (Komentarze: 10)Remiksy (0)Kolekcje (35)Powiązane
The stock parts thread right into plastic. I wanted parts that could withstand repeated disassembly.
This remixes some of the stock parts to accept heated inserts and adds room for a probe like a Pinda or Super Pinda.
The X belt tensioner also has spots for heatserts to mount a Pi camera in 3 different orientations. Holes are spaced 10mm apart. Add support for the center bridge.
You will need:
- 5x M3x5x4 threaded heatserts for the toolhead
- 2x M3x5x4 threaded heatserts for the Pinda (optional)
- 2-6x M3x5x4 threaded heatserts for the tensioner (optional)
All parts printed from PETG. If you're printing parts from ABS/ASA, consider scaling the parts up to 100.5% in your slicer.