99 modeli
iX is a cantilever desktop FDM 3D printer with open source hardware. It has a beautiful design and appearance. All non-standard structural parts are made by 3D printing. Therefore, iX has a good self-replication and expansion function.…
Here is a profile that I created from the version of the Prusa Mini, which I adapted a little for the Lerdge IX. For the moment, it only supports PLA and 2 print quality, 0.2 and 0.15 I will see to add PETG soon. Sorry, my screens are in…
At present, iX can support three types of direct extruders, and the middle model "Aquarius" direct extruder is strongly recommended, with a reduction ratio of 1:4. It balances torque and speed, and is the lightest and strongest of the…
STEP file available → here We all know the hassle when trying to align the PEI magnetic plate to the build plate especially when is already hot, so I designed this guide to put the PEI plate in place easier This part will be close to the…
Stabilisation der Z-Achse mithilfe eines Kugellagers.
STEP file available → here No support needed You will need 1 ball bearing 608 Print and press the ball bearing ring was designed for a tight fit Check out my youtube
MKS GEN-L V2.1 & Lerdge MOS case 材料清单 4个M3×12 螺丝 4个M3 螺母 8个M3×8 螺丝 4个M3×40 螺丝 2个M4×10 螺丝 2个M4 T型螺母 Bill of materials 4 units M3×12 screws 4 units M3 nuts 8 units M3×8 screws 4 units M3×40 screws 2 units M4×10 screws 2 units M4 T nuts MKS…
New version V4 file available → here Get step files here https://www.patreon.com/RayLenses Updated V3 with new fan shroud and LED slot for hotend light Watch the video on how to in YouTube Check out my youtube PrussaSlicer configuration…
Printhead including BLTouch holder for v3 of the Lerdge iX
No support needed This is a remix from a great idea from creator @jeromechassaing on cults that allows bigger spools in our printer. I changed the original design now you can use big and smaller spools also changed it to be a bit more…
if you upgraded to a direct extruder you should know that passing the filament in the filament sensor is a hassle, so I decided to create this model that will help the filament to pass through smoothly 0.2mm PLA If this model helped you,…
Hello everyone, I designed this toolhead based on the original one to install a Bltouch directly on the printhead. You only have to substitute the original one with this one using the stock hardware + 2 M3 x 6 screws. If you want a…
The stock parts thread right into plastic. I wanted parts that could withstand repeated disassembly. This remixes some of the stock parts to accept heated inserts and adds room for a probe like a Pinda or Super Pinda. The X belt tensioner…
Many guys want to upgrad the Lerdge-iX to a linear rail version. Compared with pulleys (originally used in Lerdge-iX), linear rails are easier to install and maintain, have better wear resistance, and are more conducive to long-term use.…
Many guys want to upgrad the Lerdge-iX to a linear rail version. Compared with pulleys (originally used in Lerdge-iX), linear rails are easier to install and maintain, have better wear resistance, and are more conducive to long-term use.…
Here is a led lighting system, in 24v for the Lerdge IX printer. You would need to buy: - A switch like this → HERE - A 24v led strip I added a switch on the side, in front of the printer and 24v led strips, this is powered directly, this…
Originally, the cable wanders under the bed and given the heat that the bed gives off, I didn't like it, so I created a kind of leg, a support that keeps the cable straight and a little more away from the bed, to avoid risks due to the…
STEP file available → here No suport needed to fix the back drawer on the printer you will need at least 2 M3- 8mm or M3-10 (preferable flat headed screw) to put in place like the last picture shows Remove front Y-axis idler pulley seat…
Ciao a tutti, questa testa di stampa per la Lerdge iX è stata disegnata con lo scopo di avere il Bltouch integrato nella struttura. Vi basterà sostituirla a quella originale riutilizzando le viti in dotazione + 2 M3 x 6 (o potete…
It rests on the ground and has a point of support on the printer without creating constraints. 2 types of connection available: a short one for direct drive and a long one for bowden. Screws required: diameter 3x25mm (X2) diameter 5x40-50…
Hello everyone, I designed this toolhead based on the original one to install a Bltouch directly on the printhead. You only have to substitute the original one with this one using the stock hardware + 2 M3 x 6 screws (or you can customize…
Based on the ingenious design by jwags55 . This remix is designed for the Lerdge High Power Module which is a common Heated Bed MOSFET. It should be a tight fit on 35mm DIN Rails and hold the board securely. Note: It's really easy for me…
Please give it a ❤ if you like it 🥰 You can find here all the models that I created to mount the Lerdge X, screen and mosfet on the Ender 3 ! Here is the link to the full video [FR] to mount it: Please give it a ❤ if you like it 🥰
The original 30mm hotend fan was too loud for me. That's why I designed and printed in PETG an adapter that adapts a 40mm Noctua fan. It is this fan here: NF-A4x20 5V Attention - this fan runs with 5V! So it is mandatory to reduce the…
I had light VFAs on the Y-axis, so I wanted to use a timing belt pulley with ball bearings. For this, the frame had to be adapted (wider and for 3mm shaft as M3 screw). At the same time I installed another stepper motor with 0.9 degree…
Print resolution layer hight less than 0.2
Dämpft die Vibrationen von einem Lerdge iX. Kleiner Remix von Fromock. Drucken mit 95A TPU! 4x drucken (3 für Füße 1x für Display/Mainboardarea) kleiner Remix von Fromock: Vertikal Drucken: Top layers: 0 Bottom layers: 0 Walls: 3 Infill…
I changed the height of the button to fit a little better with the Lerdge IX printer
Since this part is near the bed and the heat can cause it to change shape over time I decided to modify the original model with stronger pins preferable print with PETG or another filament that can tolerate higher temperatures layer…
STEP file available → here Print recommendations I recommend printing the Handle and lightbar in PETG or ABS since the handle should be a strong part and the LED tends to get pretty warm (PLA is not recommended because tends to deform…
trying to make Lerdge iX fixing belt unbreakable Recommendations Print in PETG uses more than 5 layer perimeters I used a) 1 M5 10mm screw and nut b) 2 M3 25mm C) 2 M3 10mm d) 2 M3 6mm coupling nut (optional) if you don't use this nut…
STEP file available → here The default acrylic lid tends to make a high-pitch noisy so I designed this one for 40mm fan that can be printed in PLA or PETG Also, it is longer and will cover more internal part Enable ironing in your slicer…
Lerdge IX Z motor base with an end-stop shield
Originally, this plate is in smoked plexiglass, but I don't find it very aesthetic, so I made an identical plate that you can print and therefore take the color you want. Personally, I took the file and I reversed it, so that the printed…
This is a modified for print head of Lerdge iX, it allows you to put Orbiter's direct extruder on it, and it allows you to install two fans on it, the cooling effect will be better. It designed by Xiao O.
Check out my youtube Get STEP file here https://www.patreon.com/RayLenses
Thx algenist for the models, the mosfet fits perfectly: https://www.thingiverse.com/thing:3313893 I added some mounting holes to the base. no support or raft needed to print this Print instructions no support or raft needed to print this
After some printing I noticed noise coming from the roller bearings installed on the X and Y axis of my Lerdge ix. I took everything apart and found that the tolerances between the bearing and the shaft are wrong and the bearing is making…
Additional remarks: I printed the inner part in two pieces, which I then super-glued together. Supports are also recommended (example of PrusaSlicer 3mf project is included for supports positions). Also, I used a drop of super-glue to…
To secure the touch sensor, two M3x8 screws with their respective nuts are required. For the fan, it is recommended to use two or four M2x4x3.2 threaded inserts with the appropriate screws.
It is possible to modify using the original Lerdge iX frame, but some additional parts will be required to complete the assembly. Major components may include the X-axis attachment plate and the heated bed base plate.
UPDATED VERSION AT THIS LINK: https://www.printables.com/model/546409-testa-di-stampa-lerdge-ix-con-bltouch-integrato I mirrored the orignal toolhead of Lerdge iX and designed a mount for the Bltouch that uses the fan holes. No supports…
A single piece belt fixture block for linear rail printers. The picture shows it on a custom adapter plate, but it will fit on the stock mounting plate with the stock screws. It is thicker for the rail version of printer.
Simple spool holders for Lerdge iX printers with direct extruders. You need to remove the handle, slide the spool holder down the extrusion, then put the handle back on. V2 is printed on it's side with supports. V3 is printed in 2 parts…
sherpa and orbiter mounts are next whats different is u can use the new fan duct with double cooling exits IF PRINTING THE AQUARIUS VERSION FOR NOW UNTIL I FIX YOU WILL NEED TO CHANGE THE X COORDINATES TO 49 INSTSEAD OF 490 AND THEN ITLL…
Mod Mejora Agarradera con Guia de UsilloTornillo sin fin Eje Z Impresora 3D Lerdge Xi
Taco T.Fox designed fan duct.
Intro: I purchased the cheap and cheerful Lerdge Aquarius because it was… Euhh.. Cheap and looked cheerful! I wasn't a fan of the standard mini stealth burner extruder, so wanted to replace that and this was the quickest solution for me.…
Base for the 2nd z Axis and the right x axis cover / pulley holde you can use the origibal pulley frame and idler adjustment knob i original left the cover open while designing but i somehow like it that way. And as always i got lazy once…
I have made three small changes to the top plate. Firstly, I added ventilation holes and a cutout for the heat sinks so that the motherboard can be passively cooled. This has been working fine for me so far, but I make no guarantees!…
Lerdge screen to BTT TFT2.4 converter.
I removed a frame-insert bracket from the x-axis pulley that would fit fine into aluminium frame of an Lerdge IX v2, but not into the frame of a Lerdge IX v3. So basically this is the Lerdge IX v3 version of the x-axis pulley from…
I realized this plate for the filament sensor on my Lerdge iX on which I installed the direct drive. Since the company suggested reinstalling the bowden motor and unplugging the cable, I realized this plate to make the printer neater. In…
After a couple years the motherboard / mainboard in my Qidi Xpro suddenly died. After checking the normal things and testing the caps, mosfets etc on the board it seemed like it might be beyond my repair skills. A replacement board from…
I updated my Lerdge IX to use the Aquarius Direct Drive. Inserting the filament into the printer became a torment. I used @raidy_980179's filament guide…
The screen is supplied with a button, but the screen is 3.5 inches and it is touch sensitive, I find that the button is useless, I never use it! So I removed it by desoldering the button and redoing a panel without the button hole.…
trying to make Lerdge iX fixing belt unbreakable Recommendations Print in PETG uses more than 5 layer perimeters I used a) 2 M3 12mm b) 2 M3 10mm c) 2 M3 6mm coupling nut (must have) Check out my youtube If this model helped you, please…
it replaces the screen for a case to fit a Bigtreetch PI. The Writing is made in Orca slicer. Prints without supports on the Elegoo Neptune 4 Pro fine. It's my First Project with Fusion 360
Hello! My kit to install lerdge-K to your FlyingBear Ghost (4s or 5) I have remixed Lerdge-X to MKS-Robin Nano holder by Silirom, now its lerdge-K holder. This kit is containing: Lerdge-K board to mks-robin nano adapter Double Lerdge…
Ciao a tutti, questa testa di stampa per la Lerdge iX è stata disegnata con lo scopo di avere il Bltouch integrato con la testa di stampa per l'estrusore Direct Drive Aquarius. Vi basterà sostituirla a quella originale riutilizzando le…
A remix of the standard fan shroud for the Lerdge iX that provides a mounting tab for 8mm proximity sensors.
The classical version backplate of Raidy has a minor design flaw in that two holes (marked on the main image) are too far aligned to the outer edges of the plate. This leads to the situation that the big screws going threw them from the…
Simple 2020 extrusion bracket using m5 screws for the extrusion and m3 + heatsets for the Lerdge Mosfet
mainboard Mount
This is part of my ongoing project to revive my original x-plus printer. I'll be posting more parts as I develop and test them. The goal is to convert it into a dedicated multicolor printer utilizing a 12 cart ERCF that I'm also building…
Print as oriented, and the cover will match the texture of the screen's bezel (No supports are needed).
Holder for an Lerdge Stepper Y Splitter Items used: All links are NON-affiliate! JST 2Pin Connection Cable Category: 3D Printer Accessories
Since I found the original power supply that came with the Lerdge IX to be extremely loud, I looked for a fanless alternative and found this affordable model . This required designing a new mounting solution. In the process, I integrated…
This is a reference model of 2in1-S1 extruders by different vendors such as Bigtreetech, Lerdge, XCR and so on. It's based on 2in1-v2 model by @darwin-de (see remix source). Provided are STL, STEP and Fusion 360 (f3d) files. Category: 3D…
He ensanchado cavidad interna de la pieza donde se aloja la polea para meter una polea GT2 de 22 dientes ,la que trae de fabrica es un casquillo inutil,
The original file by Raidy is only one single layer thick near the hole of the direct extruder. Also, it has an unintended open space close to the cable outlet of the right radial fan. As a classical version user (non-linear rail) the…
Here is a Mosfet Box for the Anycubic Kobra 2 pro. I use it for a Heatbed Mosfet and the box is conected with 2x M4 screws and t-nuts on the left side of the K2pro. In the top is space for a 4010 Fan who will connect direct to the Mosfet.…
Designed a case for the screen that comes with the Lerdge 32 bit controller for use on an Ultimaker 2 clone. Case is wide enough to cover the standard Ultimaker case cutouts Reference info > http://www.lerdge.com/ Category: 3D Printer…
Lerdge-X mount for Anycubic Kossel or for 2020 V-slot profile.
this is a remix by @ daulkarian @daulkarian. . Designed to be used when the filament spool is placed on the table behind the printer and is useful to print TPU. *Two 608 ball bearings are needed. and one M3 nut + M310 screw Check out my…
i got the 500W fanless power supply for my Lerdge iX and wanted to mount it the same way as the original https://de.aliexpress.com/item/32950139524.html if you should get the same model, i would advise to get the biggest version too, as…
Hello, When I was assembling my Lerdge iX, I noticed that the chain of the heating cable was scratching the seat of the "Y-axis idler pulley". So I smoothed the surface of the left part.
You can go lower with this motor cover than with the original cover.
I printed Raidys Part cooling fan from the file “ENclosure V3 All pars.stl” in PETG, but still after a few weeks, the front air outlet started to bend downward towards the hotbed. This happend also two my second print. To avoid this in…
Raidy's vs printhead can be found here: https://www.printables.com/de/model/592164-lerdge-ix-dual-color-extrusion-hotend-enclosure It uses a self-made backplate, of which I also provide a mod in my profile. This back-plate is the weak…
might be update in the future
I upgraded my Tevo Tornado with some hardware additions and a Lerdge-K board with a touchscreen monitor. Because the cables and the monitor take more space, a bigger boardcase is needed. So I designed three pieces that can be attached to…
Adapter for the TwoTrees Sapphire S to mount a Fly CDY v2/v3 instead of the original Lerdge X board
It can be direclty mounted to the back of the Biqu Hermit Crab 2 mounting blade on the linear rail. Direct drop in replacement, original screw can be used. Height was adjusted so the beld is in the right position. Please ignore the print…
A frontcover without Display for Klipper
Ho realizzato questa piattina per il sensore di filamento della mia Lerdge iX su cui ho installato il direct drive. La casa produttrice consigliava di reinstallare il motore dell'estrusore bowden scollegandolo ma ho pensato che in questo…
I created this Ender 5 Plus - Lerdge 3920 Optical Endstop for the X Linear Rail. It is setup so that the linear rail mounted gantry itself activates the endstop. It slides right into the sensor. This is printed in 2 pieces. The endstop…
I removed the mounting studs for the Power Extension board, as i wanted to mount the Mosfet inside. I removed the studs, and left it blank to be mounted with plastic standoffs. lazy approach, but it works and this way you can mount the…
This is a screw down mount for the Lerdge power monitoring module with tabs to position it with the board in place. The tabs can be snapped if you do not need them at some later point. Alternatively I provided a version of the part…
Replacing the Neptune 3 PRO motherboard with Lerdge Z, to replace it you need to redo all the electronics and do the wiring from scratch. If you have one printer, think carefully before reworking;)
The 40mm fan on the original just wasn't enough air flow for my liking- modified to fit a 80mm fan. Right section offsets set for Lerdge K Category: 3D Printer Accessories
This is a simple remix of Greg311's awesome dual screen front panel for the Tevo Flash. It adds just 2 small changes. A cutout for the Lerdge screen controller knob assembly (please note the cutout in the image above was done using a…
He ensanchado cavidad interna de la pieza donde se aloja la polea para meter una polea GT2 de 22 dientes ,la que trae de fabrica es un casquillo inutil,
