Lerdge iX fanless power supply holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holding brackets for a fanless power supply for the Lerdge iX 3D printer.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 249
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
i got the 500W fanless power supply for my Lerdge iX and wanted to mount it the same way as the original
https://de.aliexpress.com/item/32950139524.html
if you should get the same model, i would advise to get the biggest version too, as the specs are quite optimistic ^^. In Tests mine topped out at around 11 Amps (~ 260 Watts) which is way less then 500 but also more then enough for the printer.
It's my first 3D Print project and my first time with fusion 360 so there might be room for improvement ^^'
It's quite a tight fit but to my suprise my first prints of every part was usable, so there are some untested small changes and your mileage might vary. But you might have to adapt it to you psu model anyway.
I rushed the cable cover a little bit as i was getting impatient towards the end, so i might update it someday or someone else got a better idea :D
Edit: I despise stl but it seems i have to add them for the online preview