1 / 1
Plate for filament sensor on Lerdge iX with direct drive — zdjęcie 1

Plate for filament sensor on Lerdge iX with direct drive

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Plate for filament sensor on Lerdge iX with direct drive

Ocena
0 / 5
Polubienia
3
Pobrania
41
Wydruki
0
Wyświetlenia
368
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

I realized this plate for the filament sensor on my Lerdge iX on which I installed the direct drive. Since the company suggested reinstalling the bowden motor and unplugging the cable, I realized this plate to make the printer neater. In this way, you can use that motor for other projects too. 

To install it use 4 nuts M3 and the screws of the previous bowden setup.

I have realized a step-by-step guide on the installation and configuration of the Aquarius extruder on the Lerdge iX. I'll leave the link here (I'll do an English version of the tutorial too!):

Tagi