1 / 2
Lerdge iX Dual Color Side and Front Air outlet enclosure Addition (Raidy Mod) — zdjęcie 1
1 / 2

Lerdge iX Dual Color Side and Front Air outlet enclosure Addition (Raidy Mod)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Air redirection from radial fan to the right and front. Front outlet reduced in length and orientation wrt. original

Ocena
0 / 5
Polubienia
2
Pobrania
21
Wydruki
0
Wyświetlenia
267
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

I printed Raidys Part cooling fan from the file “ENclosure V3 All pars.stl” in PETG, but still after a few weeks, the front air outlet started to bend downward towards the hotbed. This happend also two my second print.

To avoid this in the future, I cut the print outlet in length and also at an angle, which pushes the air diagonally towards the nozzle (the original front outlet ends at a 90° angle, which is not optimal). Also the hole of a screw is moved by 0.5mm to better fit with the 5015 fan screw location. 

Thirdly, a small hole is added to allow the “nose” of the 5015 fan to sink into the design instead of strongly pushing against it.

Add supports as you deem necessary. I added the 3mf of my print (beware, I used extruder 2) to show I placed the supports. I personally liked this vertical solution better then the internal overhangs in case of horizontal part position.

Tagi