Lerdge iX Dual Color Side and Front Air outlet enclosure Addition (Raidy Mod)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Air redirection from radial fan to the right and front. Front outlet reduced in length and orientation wrt. original
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 21
- Makes
- 0
- Views
- 267
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
I printed Raidys Part cooling fan from the file “ENclosure V3 All pars.stl” in PETG, but still after a few weeks, the front air outlet started to bend downward towards the hotbed. This happend also two my second print.
To avoid this in the future, I cut the print outlet in length and also at an angle, which pushes the air diagonally towards the nozzle (the original front outlet ends at a 90° angle, which is not optimal). Also the hole of a screw is moved by 0.5mm to better fit with the 5015 fan screw location.
Thirdly, a small hole is added to allow the “nose” of the 5015 fan to sink into the design instead of strongly pushing against it.
Add supports as you deem necessary. I added the 3mf of my print (beware, I used extruder 2) to show I placed the supports. I personally liked this vertical solution better then the internal overhangs in case of horizontal part position.