Lerdge IX Extruder Motor Cover For DD
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Backplate to replace the extruder motor on the Lerdge IX when upgrading to Direct Drive
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 147
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
I updated my Lerdge IX to use the Aquarius Direct Drive.
Inserting the filament into the printer became a torment.
I used @raidy_980179's filament guide (https://www.printables.com/model/528005-lerdge-filament-sensor-improvement-for-direct-extr) to help guide the filament into the bowden tube.
However, I discovered that the motor shaft interferes with the installation.
There was a back cover here at Printables to replace the extruder motor, but I couldn't find it, I believe the creator must have removed it.
So I made one myself.
You will need 4x M3x6x5 Heat inserts.
I printed mine in ABS, however I believe PLA and PETG should work too.