Mini Stealth Burner with Lerdge Aquarius
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Quick and dirty Mini Stealth Burner adaptation for the Lerdge Aquarius extruder. Uses the bowden cowl as a basis.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 741
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Intro:
I purchased the cheap and cheerful Lerdge Aquarius because it was… Euhh.. Cheap and looked cheerful! I wasn't a fan of the standard mini stealth burner extruder, so wanted to replace that and this was the quickest solution for me.
Adapted from the standard bowden cowl model: chopped off the top, filled in some holes, and created some new ones.
Adjustment to the Lerdge Aquarius:
When you get the Aquarius, it may, or may not have an aluminium part sticking out the bottom. This needs to be removed. From the front of the extruder (motor pointing away from you), remove the two screws holding on the front plate and remove the front plate. This gives you access to a few holes, one of which holds a small screw that locks that aluminium part in place. Unscrew with a small hex key, remove part, remove screw (store for any potential future use), replace cover and screws holding the cover, and voila.
Klipper:
Use the following values in your printer.cfg under the [extruder] header:
[...]
full_steps_per_rotation: 200
rotation_distance: 5.7
microsteps: 32
[...]