Bracket to mount solenoid for Virtual pinball machine force feedback.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a mount for a solenoid to be used in a Virtual Pinball machine to provide force feedback. The solenoid impacts…
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 136
- Wydruki
- 0
- Wyświetlenia
- 973
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a mount for a solenoid to be used in a Virtual Pinball machine to provide force feedback. The solenoid impacts the bracket to make the noise/feedback. This is for a solenoid that I purchased from amazon the description for that solenoid is
Uxcell a13120200ux0916 Push Pull Open Frame Solenoid
https://www.amazon.com/gp/product/B00HR8H38A/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
The coil mounts to the bracket with M3x6mm long screws and then the entire assembly attaches to the cabinet with wood screws. Be sure to use the correct length M3 screws otherwise they will damage the winding on the coil.
I would use some loctite on the screws that mount the solenoid to the bracket and also on the little acorn nut on the solenoid so it doesn't come loose during use.
Print Settings
Printer:
Maker Farm 12" i3v
Rafts:
No
Supports:
No
Resolution:
.2mm
Infill:
20%
How I Designed This
Designed in Sketchup
Category: Hobby