Phone case for Samsung Galaxy A52/A52s
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A case for the Samsung Galaxy A52 or A52s printable in PLA with decorative pattern cut out in.
- Ocena
- 4,9 / 5
- Polubienia
- 98
- Pobrania
- 1551
- Wydruki
- 12
- Wyświetlenia
- 4814
- Oceny
- 10
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution
I redesign the model created by Callan McNamara of a case for the Samsung Galaxy A52 phone. I adjust the cut out for buttons and connectors, tightened the case and proposed an other pattern cut out in it.
I tried to print it in flexible PLA, RealFilament RealFlex white. The result is easy to put on and to remove from the phone and have probably a better protection to shock due to the softness of the materiel. The visual is good with a little post-print treatment (remove stringing) and the touch is nice and soft. But the durability is about 3 month (in a jeans pocket) before that the case is blackened and the layers begin to delaminate.
So actually I test cases printed in standard PLA: the Dailyfil Mat grey olive (really nice rendering) and Dailyfil pastel turquoise and blue. The result its seems to be good and more durable than the flexible one, I will leave a return when I have tried them for a few months. The bad point: the case is a little too tight to be easily remove from the phone.
For all material, print the case on a textured bed for a better result.