Ravioli cutter - print in place
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A ravioli cutter to get those little pointed triangles on the edge.
- Ocena
- 4 / 5
- Polubienia
- 69
- Pobrania
- 287
- Wydruki
- 5
- Wyświetlenia
- 1237
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
Quite simple use, just like a pizza cutter but across the pasta dough.
I tried to make it as generic as possible by putting in what I would consider wide margins incase people don't have their printers tuned just right. The bad news is that supports are needed and can be a bit of a faff to remove. I enabled supports everywhere and it prusa slicer seemed to work out a good middle ground. After a combination of trying to spin the cutter and using a toothpick and razor blade you can get enough of the supports removed that the cutting wheel moves freely.