Logitech K270 Keyboard foot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement foot for Logitech K270 keyboard.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 143
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
Quick little replacement foot for the Logitech K270 keybaord.
These are for the feet at the front, not the feet at the back. They're bigger!
I would suggest that if you lost one of the feet on the corners, replace that with the foot from the middle and then print a replaceement for the middle as TPU is not as good at gripping desks!
I glued mine in with hot glue as my glue gun was within easy reach!
NB: This is a stupid quick print. On my default TPU settings, it was 3 minutes. So you could stand to slow down the print to make surface finish a little better.