1 / 3
Voron 2.4 mount for Kuman 5 inch resistive touch screen display. — zdjęcie 1
1 / 3

Voron 2.4 mount for Kuman 5 inch resistive touch screen display.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is sized to fit on the 300mm version version. you can use the front A and B skirts from the 250mm version.

Ocena
0 / 5
Polubienia
35
Pobrania
345
Wydruki
1
Wyświetlenia
3647
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

This is sized to fit on the 300mm version version.  you can use the front A and B skirts from the 250mm version.

 

This should fit the Voron 2.4, 300mm by using the shorter front A and B skirts from the 250mm version.

This took me about 6 hours to model, using Alibre Design Expert.

Update:

I printed the prototype and found a couple problems.  They have been fixed and the update models loaded to replace the old version.  Unfortunately, the updated model needs more supports as there are now a couple open areas in the bottom, for GPIO plug clearance and access to the backlight button.

After printing several more test versions, I included a print-in-place support block that will result in better, more durable support structures.  I used linear type supports, as shown in the pic.