Voron 2.4 mount for Kuman 5 inch resistive touch screen display.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is sized to fit on the 300mm version version. you can use the front A and B skirts from the 250mm version.
- Rating
- 0 / 5
- Likes
- 35
- Downloads
- 345
- Makes
- 1
- Views
- 3,647
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution
This is sized to fit on the 300mm version version. you can use the front A and B skirts from the 250mm version.
This should fit the Voron 2.4, 300mm by using the shorter front A and B skirts from the 250mm version.
This took me about 6 hours to model, using Alibre Design Expert.
Update:
I printed the prototype and found a couple problems. They have been fixed and the update models loaded to replace the old version. Unfortunately, the updated model needs more supports as there are now a couple open areas in the bottom, for GPIO plug clearance and access to the backlight button.
After printing several more test versions, I included a print-in-place support block that will result in better, more durable support structures. I used linear type supports, as shown in the pic.
