Prusa Mini - Raspberry Pi (3b) Case Mounting
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
In order to attach the case to the Prusa Mini in a reasonable way and to find fixing points for the mounting bracket,…
- Ocena
- 5 / 5
- Polubienia
- 154
- Pobrania
- 852
- Wydruki
- 9
- Wyświetlenia
- 7247
- Oceny
- 10
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
In order to attach the case to the Prusa Mini in a reasonable way and to find fixing points for the mounting bracket, I had to turn it upside down. Accordingly I renamed both parts. In order to guarantee nevertheless the ventilation, I inserted to the now "cover" a few ventilation slots. An attachment to the Z-Extrusion was out of question for me because of the long way to a camera, which should be attached on the left side.
The mounting is done by clipping in the bracket and can be moved forward or backward if necessary ...
I thought I could print the mounts I had designed for the Prusa MK3s. They fit too, but are very tight, so they are very difficult to move. Then I measured ... the aluminium extrusions of the Prusa Mini are almost 0.5mm wider than those of the Mk3s. So I changed the dimensions of the mount for the Mini.
To connect the bracket and the "bottom“ part you need 2 countersunk screws M3x10mm and the nuts and 4x M3x16 screws for the case.
The case is a remix:
https://www.thingiverse.com/thing:1325370
Print instructions
Printer brand:
Prusa
Printer:
I3 MK3S
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0,2
Infill:
20%
Filament_brand:
Prusa
Filament_color:
Galaxy Black
Filament_material:
PLA