Prusa Mini - Raspberry Pi (3b) Case Mounting
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
In order to attach the case to the Prusa Mini in a reasonable way and to find fixing points for the mounting bracket,…
- Rating
- 5 / 5
- Likes
- 154
- Downloads
- 852
- Makes
- 9
- Views
- 7,247
- Reviews
- 10
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
In order to attach the case to the Prusa Mini in a reasonable way and to find fixing points for the mounting bracket, I had to turn it upside down. Accordingly I renamed both parts. In order to guarantee nevertheless the ventilation, I inserted to the now "cover" a few ventilation slots. An attachment to the Z-Extrusion was out of question for me because of the long way to a camera, which should be attached on the left side.
The mounting is done by clipping in the bracket and can be moved forward or backward if necessary ...
I thought I could print the mounts I had designed for the Prusa MK3s. They fit too, but are very tight, so they are very difficult to move. Then I measured ... the aluminium extrusions of the Prusa Mini are almost 0.5mm wider than those of the Mk3s. So I changed the dimensions of the mount for the Mini.
To connect the bracket and the "bottom“ part you need 2 countersunk screws M3x10mm and the nuts and 4x M3x16 screws for the case.
The case is a remix:
https://www.thingiverse.com/thing:1325370
Print instructions
Printer brand:
Prusa
Printer:
I3 MK3S
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0,2
Infill:
20%
Filament_brand:
Prusa
Filament_color:
Galaxy Black
Filament_material:
PLA