Shower Tub Drain Hair Catch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Catch hair and other particles that would clog your drain without interrupting drainage flow
- Ocena
- 4,833 / 5
- Polubienia
- 187
- Pobrania
- 892
- Wydruki
- 11
- Wyświetlenia
- 3177
- Oceny
- 12
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution
Complete redesign and simplification of a thingiverse model to catch hair and other particulates from getting caught in your drain.
Size to your specifications, smaller radius end goes into the drain and should form a snug fit.
The larger radius should have a gap between itself and the top of the drain for optimal flow.
Print with larger radius down and no supports are necessary
Easy to clean dry or wet.
Model shown printed in PLA, but would recommend ABS or ASA for longer term solutions.
If you get stringing within the holes, use hot air from a heat gun or blow dryer to clear them. Otherwise holes will likely hold onto smaller particles that easily pass through the drain and create a messy, hard to clean clog.