Bobble flame candle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
What usually bobbles almost all the time? For example, a candle flame.
- Ocena
- 0 / 5
- Polubienia
- 46
- Pobrania
- 179
- Wydruki
- 0
- Wyświetlenia
- 784
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Model of a candle with bobbling flame. I made this model for a flash contest “Bobbleheads” inspired by 3D printy's Emoji Printer Bobbleheads (https://www.printables.com/cs/model/224836).
In order for the flame to be slim, I had to narrow the original spring.
There are 3 parts in the files below: 1/base (candle) , 2/head (flame) and 3/new narrow spring.
Printing: No special printing requirements, e.g. 0.2mm layer, 2 perimeters, 15% infill, NO supports. Print the flame with brim just for sure.
Post processing: I recommend gluing the spring on both ends (in the base and in the flame as well). This eliminates possible backlash that could dampen the bobbling.
Tip: To attach use 8x3mm magnet or double sided tape.
Also check out: