Bobble flame candle
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.12 – €0.14 net (excluding VAT)
For file: spring_narrow_0.2mm_PLA_MK3S_10m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.13 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 9.6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
What usually bobbles almost all the time? For example, a candle flame.
- Rating
- 0 / 5
- Likes
- 46
- Downloads
- 179
- Makes
- 0
- Views
- 784
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Model of a candle with bobbling flame. I made this model for a flash contest “Bobbleheads” inspired by 3D printy's Emoji Printer Bobbleheads (https://www.printables.com/cs/model/224836).
In order for the flame to be slim, I had to narrow the original spring.
There are 3 parts in the files below: 1/base (candle) , 2/head (flame) and 3/new narrow spring.
Printing: No special printing requirements, e.g. 0.2mm layer, 2 perimeters, 15% infill, NO supports. Print the flame with brim just for sure.
Post processing: I recommend gluing the spring on both ends (in the base and in the flame as well). This eliminates possible backlash that could dampen the bobbling.
Tip: To attach use 8x3mm magnet or double sided tape.
Also check out: