Pool Cue Stick Rest/Rack (Wall-Mounted)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
What is it? This is a wall-mounted rest for your pool cue. You can avoid your cue falling over or marking up your…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 86
- Wydruki
- 0
- Wyświetlenia
- 934
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Share Alike
What is it?
This is a wall-mounted rest for your pool cue. You can avoid your cue falling over or marking up your walls.
Installation
To install, use two #8 flat head wood screws (1.25" length works fine) along with your drywall anchors of choice.
You'll want to install the rest on the wall at about 3" lower than the height of your cue sticks.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
Yes
Supports:
No
Resolution:
0.2mm
Infill:
20% Cubic
Filament:eSun PLA+ Black
Notes:
I've included two versions. The first has a flat bottom. When printing this version, I recommend a raft or brim to avoid edge lifting. The second version has a 1mm chamfer all the way around the bottom. You can print this version without the need for any such raft, etc., but it won't sit completely flush with your wall. Choose whichever one works best for your printer and preferences.