Corner for N-Scale Model Train Viaduct
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Curved double track viaduct for N-Scale Trains. For use with my model train viaducts.
- Ocena
- 0 / 5
- Polubienia
- 49
- Pobrania
- 184
- Wydruki
- 0
- Wyświetlenia
- 2106
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
This is a curve for my system of viaducts. This goes with and other components my printed viaduct system. This section was setup as a cable stay bridge, suspended from my ceiling.
The other parts for this are located here:
https://www.printables.com/social/261772-alex-mackinnon/collections/336869
This section accommodates 2 tracks with Kato's track system. In the photos, this is the suspended part. I've also provided the SketchUp files which have the overall arrangement of this part of my setup.
The versions I've printed didn't have large barrier walls to keep the trains from falling off the track. I'd suggest printing the taller versions (v2 or v3 files). I've had a couple trains go for a dive.
The back corner piece has a flat edge for abutting up against a wall. There's also a joiner piece for linking the different radius pieces together.
Print upright. This was designed to be made on a tall printer with no supports. This bolts together with small machine screws. I believe ones I used are M2.